HobbyWing USB Link Revision History

  • Software Revision History
  • CarESC Revision History
  • BoatESC Revision History
  • AircraftESC Revision History
  • ProgramBox Revision History
Version Number Type Release Date Release Notes
4.0.4 Final 12-08-2017 1. The software also optimizes the USB driver.
2. The software adds the auxiliary calculating function for Platinum series of ESCs as well.
4.0.3 Final 10-28-2016 1. The new software improves the compatibility between some PCs and Hobbywing LCD program box & ESCs.
4.0.2 Final 08-15-2016 1. Those codes that caused anti-virus software to give misinformation are deleted.
4.0.1 Final 06-04-2016 1. It can support more XeRun XR10 PRO series of ESCs.
4.0.0 Final 04-08-2016 1. Added the auto-update function for database.
2. The auto-update function of the old version of App doesn’t work anymore due to website update, so you must install the latest version to have the auto-update function.
3. All the update date of our database versions will be displayed in MM, DD, and YY.
4. From now on, the word “Beta” will be added in the version name of all the newly added firmware (if it’s a test version) in database. For example: PB-3.2.24 (Beta)...
("Beta" will be shown in the version name only if the ESC is connected to a LCD program box and a laptop.)
3.52 Final 12-24-2015 1. Fixed the update issue of software version(s).
2. Fixed known bugs on software interface display.
3.51 Final 05-16-2015 1. Fixed known bugs on software interface display.
2. Established the protocol of naming USB Link software version.
3.5 Final 04-23-2015 Some improvements have been made as shown below:
1. Fixed some "overlooked" bugs in the previous version of ESC firmware.
2. Fixed the "installation failure" bug (when trying to install it to System (C)) in the previous version.
3. Fixed the "unable to uninstall" bug in the previous version.
3.44 Final 04-15-2015 1. Fixed some display errors like characters display issue, imperfect description and etc. on some pages.
2. Added some special feature, so that this firmware can be compatible with EzRun MAX8.
3. Fixed the printing issue.
4. Removed all the HW watermarks on the HELP page.
3.43 Final 06-30-2014 1. For perfectly matching the new firmware of XeRun-120A-V3 ESC “V3.2_*****”, we revised the interfaces of Boost Timing & Turbo Timing.
2. Started to use new icon.
3. Fixed the BUG that values set at different punch rate switch points in ESC are different from values in the LCD program box.
3.42 Final 02-21-2014 1. To support the Platinum-V3 & Platinum-HV-V3 series of ESCs, the USB LINK software V3.4 has been upgraded to V3.42.
2. CONNECT/DISCONNECT buttons have been added onto the software interface, so users can make the ESC exit from the connecting status and be restarted.
3.4 Final 11-30-2013 1. Database Version for RC Vehicles has been updated to “130814”.
New Firmware for XeRun-150A, XeRun-SCT-PRO, EzRun-150A-PRO and EzRun-WP-SC8 ESCs has been released; it greatly optimized the performance of these ESCs.
2. Bug Fix for USB Link Software (BUG: when updating the LCD program box firmware, the progress bar often gets lost)
3.3 Final 05-13-2013 1. Database is updated to the latest Version: 130511 include new firmware for XeRun-150A and XeRun-SCT-PRO ESC.
it increases the siganl tolerance for the 4 poles sensored motor and the reliability of the ESC,
and now the startup of motor becomes more powerful and more smoother.
2. The firmware of the Multifunction LCD Program Box is updated to improve the compatibility with 64bits Windows 7 operating system.
3.2 Final 12-04-2012 Improvements on the Hobbywing USB Link Software V3.1:
1. Database is updated to the latest Verison: 121204, which includes new firmware for XeRun-120A-V3.1 and XeRun-Justock ESCs.
2. Fixed the software bug exists in V3.1: the error occurs when importing and exporting the Punch Rate data.
3. Improved the adjustment of Boost Slope to let the setting process easier.
4. Fixed the software bug in V3.1: the 8th programmable item /Max. Brake Force (of the XeRun-Justock ESC) cannot be displayed or set via the firmware.
3.0 Final 04-01-2012 1. New firmware for XeRun-V3.
2. New firmware for all ESCs.
1.63 Final 01-19-2011 1. Added some features: more programmable items (in STOCK firmware) for XeRun series of Car ESCs.
Final 05-12-2010 1. Added some features: more programmable items (in STOCK firmware) for XeRun series of Car ESCs.
Final 10-23-2009 1. Added some features: after upgrade, now the firmware has progress bar.
2. Added some features: now the firmware have speed-calculating function for ESCs in governor mode.
Final 01-16-2009 1. Added new firmware for XeRun-120A-V2.
2. Added new firmware for EzRun-80A/150A.
Final 01-07-2009 1. Added data-recording function for checking the motor’s operation.
2. Revised the firmware: v090105 to make RC vehicle have higher top speed when using GT ESC(s).
1.0 Final 01-04-2009 1. First release.

  • XeRun XR8 PLUS
  • XeRun XR8 SCT
  • XeRun XR10 PRO 160A
  • XeRun XR10 PRO 1S
  • XeRun XR10 JUSTOCK
  • XeRun XR10 PRO STOCK SPEC
  • XeRun XR10 PRO STOCK SPEC 1S
  • EzRun MAX5
  • EzRun MAX6
  • EzRun MAX8
  • EzRun MAX10
  • Old Products
Firmware Version Type Release Date Release Notes
XR-4.3.01 Final 10-28-2016 1. Which allows users to set the “Running Mode” to “Forward/Reverse” and the “Reverse Force” to “100%.
XR-4.2.08 Final 08-15-2016 1. Which supports HOBBYWING WiFi Module & WiFi Link software.
XR-4.2.01 Final 04-08-2016 1. Now the firmware allows ESC to work in the Full-sensored mode and Turbo Timing is also available in this mode.
XR-4.1.62 Final 04-08-2016 1. Solved the motor noise issue during the low-speed start-up process in Sensored/Sensorless Hybrid mode.
XR-4.1.51 Final 12-23-2015 1. Users can have a better "Punch" via this firmware.
XR-4.1.30 Final 10-15-2015 1. Users can have a better "Coast" via this firmware.
XR-4.1.25 Final 09-01-2015 1. Firmware upgrade due to hardware update.
XR-4.1.22 Final 07-17-2015 1. First release.
Firmware Version Type Release Date Release Notes
XR-4.2.01 Final 10-28-2016 1. Which allows users to set the “Running Mode” to “Forward/Reverse” and the “Reverse Force” to “100%”.
XR-4.1.08 Final 10-28-2016 1. First release.
Firmware Version Type Release Date Release Notes
XR-4.3.01 Final 03-22-2018 1. It provides users with more options when adjusting PWM Drive Frequency, Brake Frequency, Softening Range and Softening Value and enhances the “Low-voltage Cutoff Protection” function.
XR-4.3.01-BRCA. Final 03-22-2018 1. It provides users with more options when adjusting PWM Drive Frequency, Brake Frequency, Softening Range and Softening Value and enhances the “Low-voltage Cutoff Protection” function. it’s dedicated for the BRCA racing.
XR-4.2.01-BRCA. Final 05-24-2017 1. It’s dedicated for the BRCA racing.
XR-4.2.06 Final 03-28-2017 1. Which fixed the problem with LED indication.
XR-4.2.01 Final 08-15-2016 1. Which “Softening Value” & “Softening Range” two programmable items are added.
XR-4.1.05 Final 04-08-2016 1. First release.
Firmware Version Type Release Date Release Notes
XR-4.2.01 Final 03-22-2018 1. It provides users with more options when adjusting PWM Drive Frequency, Brake Frequency, Softening Range and Softening Value and enhances the “Low-voltage Cutoff Protection” function.
XR-4.2.01-BRCA. Final 03-22-2018 1. It provides users with more options when adjusting PWM Drive Frequency, Brake Frequency, Softening Range and Softening Value and enhances the “Low-voltage Cutoff Protection” function. it’s dedicated for the BRCA racing.
XR-4.1.01-BRCA. Final 05-24-2017 1. It’s dedicated for the BRCA racing.
XR-4.1.02 Final 03-28-2017 1. Which fixed the problem with LED indication.
XR-4.1.01 Final 08-15-2016 1. First release, it supports HOBBYWING WiFi Module & WiFi Link software.
Firmware Version Type Release Date Release Notes
V1_509_No Timing Final 12-23-2015 1. First release.
Firmware Version Type Release Date Release Notes
XR-4.2.01 Final 03-22-2018 1. It provides users with more options when adjusting PWM Drive Frequency, Brake Frequency, Softening Range and Softening Value and enhances the “Low-voltage Cutoff Protection” function.
XR-4.2.01-BRCA. Final 03-22-2018 1. It provides users with more options when adjusting PWM Drive Frequency, Brake Frequency, Softening Range and Softening Value and enhances the “Low-voltage Cutoff Protection” function. it’s dedicated for the BRCA racing.
XR-4.1.02-BRCA. Final 05-24-2017 1. It’s dedicated for the BRCA racing.
XR-4.1.05 Final 03-28-2017 1. Which fixed the problem with LED indication.
XR-4.1.02 Final 10-28-2016 1. Fix something problem.
XR-4.1.01 Final 08-15-2016 1. First release, it supports HOBBYWING WiFi Module & WiFi Link software.
Firmware Version Type Release Date Release Notes
XR-4.2.01 Final 03-22-2018 1. It provides users with more options when adjusting PWM Drive Frequency, Brake Frequency, Softening Range and Softening Value and enhances the “Low-voltage Cutoff Protection” function.
XR-4.2.01-BRCA. Final 03-22-2018 1. It provides users with more options when adjusting PWM Drive Frequency, Brake Frequency, Softening Range and Softening Value and enhances the “Low-voltage Cutoff Protection” function. it’s dedicated for the BRCA racing.
XR-4.1.02-BRCA. Final 05-24-2017 1. It’s dedicated for the BRCA racing.
XR-4.1.05 Final 03-28-2017 1. Which fixed the problem with LED indication.
XR-4.1.02 Final 10-28-2016 1. First release.
Firmware Version Type Release Date Release Notes
B1.32 Final 08-15-2016 1. For EzRun MAX5 ESCs(HW464SL_KZ1_V1.3), it supports HOBBYWING WiFi Module & WiFi Link software.
B1.30 Final 08-15-2016 1. For EzRun MAX5 ESCs(HW464SL_KZ1_V1.1), it supports HOBBYWING WiFi Module & WiFi Link software.
B1.20 Final 10-15-2015 1. For EzRun MAX5 ESCs, firmware upgrade due to hardware update (from HW464SL_KZ1_V1.1 to HW464SL_KZ1_V1.3).
B1.12 Final 09-01-2015 1. For EzRun MAX5 ESCs, first release.
Firmware Version Type Release Date Release Notes
B1.26 Final 08-15-2016 1. For EzRun MAX6 ESCs, it supports HOBBYWING WiFi Module & WiFi Link software.
B1.12 Final 09-01-2015 1. For EzRun MAX6 ESCs, first release.
Firmware Version Type Release Date Release Notes
B1.49 Final 08-15-2016 1. For EzRun MAX8 ESCs(HW460SL_KZ1_V2.1), it supports HOBBYWING WiFi Module & WiFi Link software.
B1.48 Final 08-15-2016 1. For EzRun MAX8 ESCs(HW460SL_KZ1_V2.2), it supports HOBBYWING WiFi Module & WiFi Link software.
B1.36 Final 04-15-2015 1. For EzRun MAX8 ESCs, first release.
Firmware Version Type Release Date Release Notes
B1.26 Final 08-15-2016 1. For EzRun MAX10 SCT ESCs, it supports HOBBYWING WiFi Module & WiFi Link software.
B1.06 Final 08-15-2016 1. For EzRun MAX10 ESCs, first release, it supports HOBBYWING WiFi Module & WiFi Link software.
B1.20 Final 06-04-2016 1. For EzRun MAX10 SCT ESCs, first release.
Database Version Type Release Date Release Notes
DRIVING_V3.52.04 Final 12-23-2015 1. Released a new version of firmware "XR-4.1.51" (for XeRun-XR8 PLUS) for better "Punch".
2. Released a new version of firmware "V1_509_No Timing"(for XeRun-XR10 Justock).
DRIVING_V3.52.03 Final 10-15-2015 1. Released a new version of firmware "XR-4.1.30" (for XeRun-XR8 PLUS) for better "Coast".
2. Released a new version of firmware "B1.20"(for EzRun MAX5) due to hardware update (from HW464SL_KZ1_V1.1 to HW464SL_KZ1_V1.3).
DRIVING_V3.52.02 Final 09-01-2015 1. Released one version of firmware "XR-4.1.25" for XeRun XR8 PLUS.
2. Released the special firmware for EzRun MAX5 and EzRun MAX6.
DRIVING_V3.52.01 Final 07-17-2015 1. Released one version of firmware "V3.1_121129_Beta" for XeRun-120A-V3.
2. Released the special firmware "XR-4.1.22" for XeRun XR8 PLUS.
150410 Final 04-15-2015 1. Released the special firmware for EzRun MAX series of ESCs like MAX8, MAX6, MAX5 and etc.
2. Released new firmware "V1.04_150409" for XeRun-150A-V1, "V1.05_150408" for SCT-PRO. Some improvements have been made as shown below:
I. Revised factory default settings and improved the reliability of the product.
II. Fixed the "low-voltage cutoff protection gets activated too early" issue when using poor-quality batteries.
140627 Final 06-27-2014 Here we release new firmware "V3.2_140627_Beta" for XeRun-120A-V3 ESCs, this new firmware mainly improved the following aspects:
1. Comparing with the previous version, it can bring better low-speed power while less heat to the motor when activating the Boost & Turbo timing;
2. Fixed the short-time weak brake effects after a quick full brake operation with the option "maximum brake force" set to 75% or above.
3. Solved the cogging issue previously happened to some motors at extremely low throttle with Boost/Turbo Timing activated.
130814 Final 11-30-2013 Here we release new firmware "V103_130806-Beta" for XeRun-150A, XeRun-SCT-PRO, EzRun-150A, EzRun-WP-SC8 ESCs, and following improvements have been made on the former version:
1 Excellent low-speed startup greatly improved the linearity.
2. The acceleration is much quicker than before. The new firmware eliminates the discontinuous speed jump in the old firmware, now the control feeling in sensorless mode is very similar to the control feeling of sensored brushless system.
3 Compatibility with Tenshock sensored motor has been observably improved.
4. Supports motors with higher KV. The new firmware solves the trembling problem occurs to some high RPM multi-poles (>=4 poles) motors at partial throttle.
5. The new firmware is "SAFER" than the old one.
a) It doesn’t allow the neutral throttle point to coincide with the full throttle point, while the old firmware allows user to set them to a same point. Therefore, the new firmware eliminates the possibility of unexpected full-speed running when the ESC is switched on. Undoubtedly, it makes the whole system safer for users and crowd nearby.
b) When the ESC is switched on, the motor can be started ONLY if the ESC detects the throttle signal is correct and in the neutral range. If the throttle signal is out of the neutral range, then the motor cannot be started. This also makes the entire system more secure for RC car drivers and people close by.
130520 Final 05-20-2013 1. Database is updated to version 130520 for EzRun-WP-60A and EzRun-WP-80A.
130516 Final 05-16-2013 1. Database is updated to version 130516, which includes the new firmware "V1.01_130515a_2R" for XeRun-150A and XeRun-SCT-PRO ESCs.
2016 Final 04-08-2016 1. Added the auto-update function for database.
2. The auto-update function of the old version of App doesn’t work anymore due to website update, so you must install the latest version to have the auto-update function.
3. All the update date of our database versions will be displayed in MM, DD, YY.
4. From now on, the word “Beta” will be added in the version name of all the newly added firmware (if it’s a test version) in database. For example: PB-3.2.24 (Beta)...
("Beta" will be shown in the version name only if the ESC is connected to a LCD program box and a laptop. )
130511 Final 05-13-2013 1. Database is updated to version 130511, which includes the new firmware for XeRun-150A and XeRun-SCT-PRO ESCs.
The firmware increases the sensor siganl tolerance for 4 pole sensored motors and the reliability of the ESC, and the startup of motor becomes more powerful and smoother.
121204 Final 12-04-2012 1. New firmware for XeRun-V3.
120317 Final 04-01-2012 1. New firmware for XeRun-V3.
111011 Final 10-11-2011 The Firmware database of the car ESC has been updated to the latest Version 111008.
1. Two versions of firmware named "V3.0_110930_MOD" and "V3.0_110930_STOCK: are available for the following ESCs:
XeRun-120A (V2.0), XeRun-60A (V2.0), XeRun-120A (V2.1), XeRun-60A (V2.1), Xtreme STOCK
a) "V3.0_110930_MOD" is an improved version of firmware based on "V3.0_110119_MOD"; the new firmware has been updated to improve the fault tolerance of the signal quality of the Hall sensors on the sensor PCB of brushless motors.
The old firmware was found to be too sensitive to any small change of the sensor signal, in turn causing the ESC to frequently switch its running mode from sensored to sensorless. The new firmware is not as sensitive as the older version, so the ESC can still operate in sensored mode even if the signal has slight changes in amplitude from small error, that may eventually help Mod motors which have very large current flows which cause the signal on the sensor PCB of the motor to change frequently and result in evitable errors .
b) "V3.0_110930_STOCK" is a new version based on "V3.0_110211_STOCK", which has the same improvements as above.
2. New firmware named "V3_508_No Timing" is also applicable to the JUSTOCK ESC. The improvements are as follows:
a) For finer adjustment, options under the "Maximum Brake Force" has increased from 4 to 8.
b) The new firmware has been updated to improve the fault tolerance of the signal quality of the Hall sensors on the sensor PCB of the brushless sensored motor’s.
3. New firmware named "111011_2R" is applicable for the following ESCs:
XeRun-80A, XeRun-150A, XeRun-SCT Pro
a) "111011_2R" firmware improves the fault tolerance of the signal quality of the Hall sensors within the sensor board of brushless motors.
1.92 Final 03-10-2011 The latest firmware "110211_stock" is released.
Team Hobbywing won the Open Brushless Racing in TITC 2011 with this firmware.
1.92 Final 01-19-2011 Two versions of firmware "V3.0_110119STOCK" and "V3.0_1109119_MOD" are released.
Compared with the previous versions like 0518_STOCK, the 3rd generation STOCK firmware "110119_STOCK" has the following advantages:
1. Stronger and quicker acceleration, but the temperature of ESC and motor is even lower than before.
2. Boost Timing and Turbo Timing can be adjusted more smoothly, with the precision of 1 degree per step.
3. Turbo Timing and Boost Timing can be composited to be functional together (Total effective timing is 60 degree).
4. Turbo Timing increasing rate (slope rate) is adjustable.
5. Brake Force is changed from 4 options to 8 options.
1.79 Final 09-17-2010 The new firmware "100912-2R" for XeRun-80A, XeRun-150A, EzRun-SC10, EzRun-SC8 has the following improvements:
1. Fixed the bug that ESC can be shut off for a short time (usually several seconds) caused by thermal protection which is mistakenly activated for some reason.
2. Optimized the switching of “Forward and Reverse” running mode.
1.76 Final 07-20-2010 1. The new firmware "VER1.0_100715-2R" for XeRun-80A and XeRun-150A ESC eliminates the incompatibility issue when the ESC works with Futaba 4PK system in sensored mode, the reliability of the ESC is also improved.
1.75 Final 06-10-2010 1. The new firmware "100605" for XeRun-150A/80A significantly improves the low-speed startup and throttle linearity.
2. The new firmware "100528_Mod" for XeRun-120A/60A V2.0 (or later) is suitable for Modified class. The turbo technology is also implemented in this firmware, so the top speed is increased.
1.74 Final 05-18-2010 1. Added new STOCK firmware "100518STOCK" for XeRun-120A-V2, XeRun-60A-V2.
2. Added new firmware "100324_3R" for XeRun-80A, XeRun-150A, which support the sensored motor more smoothly.
1.72 Final 04-26-2010 1. Added new STOCK firmware "100422STOCK" for XeRun-120A-V2 and XeRun-60A-V2 ,the Dynamic timing and Turbo Timing are availabe with this firmware.
1.69 Final 12-18-2009 1. Added new firmware for XeRun-120A-V2, XeRun-60A-V2, XeRun-80A-V1, XeRun-150A-V1 ESCs.
1.65 Final 11-19-2009 1. New firmware is released for CAR ESCs.
Final 10-23-2009 1. Added some more programmable items.
Final 01-16-2009 1. Added new firmware for XeRun-120A-V2.
2. Added new firmware for EzRun-80A/150A.
Final 01-07-2009 1. Added data-recording function for checking the motor’s operation.
2. Revised the firmware: v090105 to make RC vehicle have higher top speed when using GT ESC(s).
Final 01-04-2009 1. First release

      

  • Seaking PRO 160A
  • Seaking PRO 120A
  • Seaking V3
Firmware Version Type Release Date Release Notes
SK-3.1.17 Final 05-24-2017 1. it fixes some known issues.
SK-3.1.16 Final 10-28-2016 1. Which improves the communication capability and strengthens the voltage protection function (of the ESCs) for meeting the racing requirements.
SK-3.1.15 Final 04-08-2016 1. First release.
Firmware Version Type Release Date Release Notes
SK-3.1.06 Final 05-24-2017 1. it fixes some known issues.
SK-3.1.05 Final 10-28-2016 1. First release, which improves the communication capability and strengthens the voltage protection function (of the ESCs) for meeting the racing requirements.
Firmware Version Type Release Date Release Notes

      

  • Platinum 25A V4
  • Platinum 40A V4
  • Platinum 60A V4
  • Platinum 80A V4
  • Platinum 120A V4
  • Platinum HV 130A V4
  • Platinum HV 160A V4
  • Platinum HV 130A OPTO V4
  • Platinum HV 200A V4
  • Platinum 40A/50A V3
  • Platinum 100A V3
  • Platinum HV 100A OPTO V3
  • Old Products
Firmware Version Type Release Date Release Notes
PL-04.0.00 Final 12-08-2017 1. First release.
Firmware Version Type Release Date Release Notes
PL-04.0.00 Final 12-08-2017 1. First release.
Firmware Version Type Release Date Release Notes
PL-04.0.05 Final 06-08-2016 1. It fixes “the display issue when LVC protection activates” occurred to the old version of firmware (which is also called “PL-04.0.05”).
PL-04.0.05 Final 11-17-2016 1. Which adds the data transmission function (transmits various data of the ESC to the transmitter in real time when moving the throttle stick to the bottom/zero-throttle position) and improves the POST (power-on self test) function.
PL-04.0.04 Final 06-04-2016 1. Which supports the ESC to adjust startup force and output data.
PL-04.0.03 Final 04-08-2016 1. It can support the ESC to have the speed-governing function via VBAR.
PL-04.0.02 Final 12-24-2015 1. Release new firmware.
PL-04.0.00 Final 09-02-2015 1. First release.
Firmware Version Type Release Date Release Notes
PL-04.0.04 Final 11-17-2016 1. Which adds the data transmission function (transmits various data of the ESC to the transmitter in real time when moving the throttle stick to the bottom/zero-throttle position) and improves the POST (power-on self test) function.
PL-04.0.03 Final 06-04-2016 1. Which supports the ESC to adjust startup force and output data.
PL-04.0.02 Final 04-08-2016 1. First release, which supports the ESC to have the speed-governing function via VBAR.
Firmware Version Type Release Date Release Notes
PL-04.0.05 Final 05-24-2017 1. it improves the "heat" matter.
PL-04.0.04 Final 11-17-2016 1. Which adds the data transmission function (transmits various data of the ESC to the transmitter in real time when moving the throttle stick to the bottom/zero-throttle position) and improves the POST (power-on self test) function.
PL-04.0.03 Final 06-04-2016 1. Which supports the ESC to adjust startup force and output data.
PL-04.0.02 Final 04-08-2016 1. First release, which supports the ESC to have the speed-governing function via VBAR.
Firmware Version Type Release Date Release Notes
PL-04.0.04 Final 11-17-2016 1. Which adds the data transmission function (transmits various data of the ESC to the transmitter in real time when moving the throttle stick to the bottom/zero-throttle position) and improves the POST (power-on self test) function.
PL-04.0.03 Final 08-15-2016 1. Which supports TXE-K. data transmission.
PL-04.0.02 Final 06-04-2016 1. Which supports the ESC to adjust startup force and output Jlog data.
PL-04.0.00 Final 04-08-2016 1. First release, which supports the ESC to have the speed-governing function via VBAR.
Firmware Version Type Release Date Release Notes
PL-04.0.06 Final 11-17-2016 1. Which adds the data transmission function (transmits various data of the ESC to the transmitter in real time when moving the throttle stick to the bottom/zero-throttle position) and improves the POST (power-on self test) function.
PL-04.0.05 Final 08-15-2016 1. Which supports Jlog data transmission.
PL-04.0.04 Final 08-15-2016 1. Which supports TXE-K. data transmission.
PL-04.0.03 Final 06-04-2016 1. Which supports the ESC to adjust startup force.
PL-04.0.01 Final 11-18-2015 1. Release new firmware.
PL-04.0.00 Final 09-02-2015 1. First release.
Firmware Version Type Release Date Release Notes
PL_OPTO-04.0.04 Final 11-17-2016 1. Which adds the data transmission function (transmits various data of the ESC to the transmitter in real time when moving the throttle stick to the bottom/zero-throttle position) and improves the POST (power-on self test) function.
PL_OPTO-04.0.03 Final 08-15-2016 1. Which supports TXE-K. data transmission.
PL_OPTO-04.0.02 Final 06-04-2016 1. Which supports the ESC to adjust startup force and output Jlog data.
PL_OPTO-04.0.00 Final 04-08-2016 1. First release, which supports the ESC to have the speed-governing function via VBAR.
Firmware Version Type Release Date Release Notes
PL200-04.0.05 Final 11-17-2016 1. Which adds the data transmission function (transmits various data of the ESC to the transmitter in real time when moving the throttle stick to the bottom/zero-throttle position) and improves the POST (power-on self test) function.
PL200-04.0.04 Final 08-15-2016 1. Which supports Jlog data transmission.
PL200-04.0.03 Final 08-15-2016 1. Which supports TXE-K. data transmission.
PL200-04.0.02 Final 06-04-2016 1. Which supports the ESC to adjust startup force.
PL200-04.0.01 Final 11-18-2015 1. Release new firmware.
PL200-04.0.00 Final 09-02-2015 1. First release.
Firmware Version Type Release Date Release Notes
PL-04.0.10 Final 12-08-2017 1. First release.
Firmware Version Type Release Date Release Notes
PL200-04.0.10 Final 03-22-2018 1. First release.
Firmware Version Type Release Date Release Notes
PL200OPTO-4.0.10 Final 03-22-2018 1. First release.
Firmware Version Type Release Date Release Notes
B3.03_U Final 05-03-2014 1. Release new firmware.
B3.01_U Final 03-18-2014 1. First release.
Firmware Version Type Release Date Release Notes
B3.03_U Final 05-03-2014 1. Release new firmware.
B3.01_U Final 03-18-2014 1. First release.
Firmware Version Type Release Date Release Notes
B3.03_U Final 08-07-2015 1. Release new firmware.
Database Version Type Release Date Release Notes
FLYING_V3.52.06 Final 12-24-2015 1. Deleted two versions of outdated firmware for Platinum-HV-V4 ESCs (PL-04.0.00 for PL 160A, PL200-04.0.00 for PL 200A) from the software package.
FLYING_V3.52.05 Final 12-18-2015 1. Added new firmware "PL-04.0.02" for PLATINUM HV series of aircraft ESCs, which revised the voltage test range.
FLYING_V3.52.04 Final 11-18-2015 1. Released new firmware "PL200-04.0.01" for “Platinum-200A-HV-V4”.
2. Released new firmware "PL-04.0.01" for Platinum-HV-V4 series of ESCs.
FLYING_V3.52.03 Final 09-02-2015 1. It can support more Platinum-HV-V4 series of ESCs.
2. It can support more Platinum-V4 series of ESCs.
FLYING_V3.52.02 Final 08-07-2015 1. It can support the Platinum-100A-HV-V3.
FLYING_V3.52.01 Final 07-17-2015 1. It can support the Platinum-HV-V4 series of ESCs.
140318 Final 03-18-2014 1. Upgraded the database for Platinum-V3, Platinum-HV-V3 and LCD Program Box. 1.1 Fixed the bug (operation issue when users factory-reset their ESCs via throttle stick) happens to Platinum-V3 & Platinum-HV-V3 series ESCs.
1.2 Decreased the switching speed, when Platinum-V3 & Platinum-HV-V3 series ESCs were/are in the “governor” mode, to 1.7 seconds.
2. Fixed the bug (multfunction LCD program box is not compatible with car ESCs) exists in firmware "V1.16_131105" and update it to "V1.17_140315".
3. Added the firmware for Platinum-30A-OPTO ESCs into the database.
3.42 Final 02-21-2014 1. Added database for Platinum-V3, Platinum-HV-V3 and LCD Program Box.
3.3 Final 05-13-2013 1. Added the firmware “PROGRAMECARD / HW310_V2.1 / ‘V1.14_130508’" for LCD Program Box.
3.1 Final 12-04-2012 1. Added the firmware “PROGRAMECARD / HW310_V2.1 / ‘V1.12_120426’” for LCD Program Box.
3.0 Final 04-01-2012 1. Released new firmware for for all ESCs.
1.19 Final 09-21-2011 1. Upgraded the firmware “V1.08_101106_U_a” for PL120A-HV ESC, now the firmware is compatible with V-bar & Hyperion emeter (V2) tachometer RPM sensor.
1.18 Final 08-31-2011 1. Upgraded the firmware for Platinum series of ESCs. Now the firmware is only applicable for PL40A-PRO, PL60A-PRO, PL80A-PRO, PL100A-PRO, and PL120A-HV.
1.17 Final 01-19-2011 1. Upgraded the firmware for 2In1 LCD Program Box.
1.15 Final 11-06-2010 1. Upgraded the firmware for Platinum series of ESCs. Now the firmware is only applicable for PL40A-PRO, PL60A-PRO, PL80A-PRO, and PL100A-PRO.
1.14 Final 05-12-2010 1. Upgraded the firmware for Platinum series of ESCs. Now the firmware is only applicable for PL40A-PRO, PL60A-PRO, PL80A-PRO, and PL100A-PRO.
2. Upgraded the firmware for the 2In1 LCD Program Box. Now more programmable items or parameters will be displayed when programming XeRun series of Car ESCs (in STOCk mode) with this LCD Program Box.
1.13 Final 04-22-2010 1. Upgraded the firmware for Platinum series of ESCs. Now the firmware is only applicable for PL40A-PRO, PL60A-PRO, PL80A-PRO, and PL100A-PRO.
1.10 Final 12-24-2009 1. If users program their ESCs during the running, then they should reset the ESCs before driving motors.
1.09 Final 10-23-2009 1. First release

      

  • Multifunction LCD Program Box
Firmware Version Type Release Date Release Notes
PB-3.2.31 Final 10-28-2016 1. Optimize the performance of the LCD program box.
PB-3.2.30 Final 08-15-2016 1. It can support XeRun XR10 PRO ESCs to have more programmable items.
PB-3.2.28 Final 06-04-2016 1. It can support more XeRun XR10 PRO series of ESCs.
2. It supports the LCD program box to display temperatures in Fahrenheit degrees and capacitor temperature also in Fahrenheit degrees for Platinum V4 series & Platinum HV V4 series of aircraft ESCs.
PB-3.2.25 Final 04-08-2016 1. It can support the programming of EzRun MAX10.
2. Fixed the display issue after connected the XR8 ESC to a LCD program box for ESC programming.
PB-3.2.22 Final 11-18-2015 1. It can support the programming of Seaking Pro 160A.
PB-3.2.21 Final 10-15-2015 1.Revised the firmware for ensuring BEC voltages displayed on the LCD program box equal to the actual BEC voltages of ESCs.
PB-3.2.20 Final 09-02-2015 1. It can support more EzRun MAX V3 series of car ESCs and Platinum LV V4 series of aircraft ESCs.
PB-3.2.19 Final 07-17-2015 1. It can supports EzRun MAX V3 series of car ESCs, PLATINUM HV V4 series of aircraft ESCs, and XeRun XR8 series of car ESCs.
1.18_150114 Final 04-15-2015 1. It can support EzRun MAX V3 series of car ESCs and PLATINUM V4 series of aircraft ESCs.