|
This combo is specially designed for ROCK CRAWLER.
The Combo includes the following items:
 EZRUN-35A-SL brushless ESC for rock crawler 1pcs Note1
32T brushless motor 1pcs
Program card for car ESC 1pcs
Note1: The ESC in this combo has the same hardware and firmware as Hobbywing's standard EZRUN-35A-SL ESC, but the programmable items are preset to the values suitable for rock crawler.
1 Specification of The ESC
1.1 Output: Continuous current 35A, burst current 190A.
1.2 Input: 4-9 cells NiMH/NiCd or 2-3 cells LiPo.
1.3 BEC Output: 6V/1.5A.
1.4 Resistance: 0.0015 Ohm.
1.5 Motor Supported: Sensorless Brushless Motor
1.6 Size: 31.5mm(L) * 27.5mm(W) * 24mm(H).
1.7 Weight: 30g(Without wires)
2 Specification of The Motor
¡¡
|
Model
|
KV
|
Diameter
mm |
Length
mm (Without Shaft) |
Shaft
mm |
Shaft Length
mm |
Weight
g |
|
32T/SL-3650M |
1200 |
35.8 |
50.0 |
3.17 |
15 |
165 |
3 Features
3.1 Special program for rock crawler.
3.2 Use top quality electronic components to enhance the current endurance ability of the ESC.
3.3 Excellent start-up, acceleration and linearity features.
3.4 With 9 start modes (Also called "Punch" ) from "Soft" to "Very aggressive".
3.5 Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
3.6 Easily program with only one button and compatible with pocket-sized program card.
3.7 The ESC is USB supported. The firmware of the ESC can be updated through an USB adapter on the Advanced LCD Program Box (Optional device).
3.8 Motor uses top quality materials:
Aluminium shell (case)
High quality magnets
Copper wires of high temperature endurance
Good quality bearings.
3.9 Dustproof design for the motor.
¡¡
3 Programmable Items (Click the following picture to enlarge it)
For detail information, please read the user manual for reference. | 
