Home > Car Systems > XeRun V10 G3

RPM Significantly Improved (for Stock Spec)

The G3 Stock Spec motor has its torque and KV rating improved by 4% and 16%
respectively, compared with the V10 G2 Stock Spec motor. The high torque & RPM
definitely will make this unit a “secrete weapon” for the Stock class racing.

RPM Significantly Improved
(for Stock Spec)

XeRun V10 G3 Stock Spec

First-rate Linearity

The built-in high precision Hall sensor combined with the high precision
and balanced rotor will guarantee remarkable linearity of the motor.

First-rate
Linearity

Super Lightweight

The G3 Modified & Stock motors only weigh 161g and 132g
respectively; the weights are reduced by about 11% & 21%
when comparing with the V10 G2 motor. With the light weights,
drivers can easily adjust the balance of their vehicles.

Super
Lightweight

Asymmetric Bearings

By comparison (with the V10 G2 motor), for improving
the load-carrying capacity, the size of the front
bearing of the G3 motor is increased by 26% ; while
for lower resistance, the size of the rear bearing is
reduced by 6%. The asymmetric bearing design will
make the motor running more stable and smooth.

Asymmetric
Bearings

XeRun V10 G3 

Great Heat Dissipation

The special shell design which makes the stator core (/laminations) expose to
the air will maximize cooling, the big holes(*) on the front & rear end plates will
guarantee outstanding heat dissipation of the motor.
(*Note: the 5.5T~8.5T motors are mainly adopted by off-road vehicles,
so the tactory detault end plates for those motors are the ones with small holes.)

Great Heat
Dissipation

Stepless Adjustable Mechanical Timing

The mechanical timing can be adjusted finely and smoothly; the skid-proof lines
at the rear end of the motor will guarantee stability of the timing after adjustment.

Stepless Adjustable
Mechanical Timing

Re-buildable Structure

The detachable structure design for regular cleaning & maintenance will
effectively prolong the service life of the motor and retain its efficiency.

Re-buildable
Structure

Exploded View of
XeRun V10 G3

Two Different End Plates

The end plates with big holes adopted by the 3.5T~5.0T & 10.5T~21.5T motors will
guarantee excellent heat dissipation of the motor for on-road applications.
The end plates with small holes used by the 5.5T~8.5T motors will effectively prevent sand
or dirt from getting inside and damaging the motor for off-road applications.
Users can purchase and mount the end plates with big or small holes as per actual needs.

Two Different
End Plates

End Plates with Small Holes

End Plates with Big Holes

High-quality Components

The use of high-performance stator core (/laminations),
heat(200℃)-resistant pure copper wire, heat(200℃)-resistant
rotor with strong structure, international top brand high-precision
and high strength bearings, and copper solder tabs with super current
endurance will guarantee excellent performance and great
durability.

High-quality
Components