High Voltage ESC
The 18S high voltage ESC is 76V, has lower current and generates lesser heat compared to low voltage ESC.
Intelligent protection, fault storage
Power-on self-test, undervoltage protection, overvoltage protection, overcurrent protection,
throttle signal loss protection, infinite restart, etc. According to the real-time working
conditions, the ESC intelligently protect the flight safety of the drone.
*The ESC has its own fault storage function for fault analysis.
Protection class IP55
By using lightweight nano-coating, together with an integrated aluminum alloy shell,
the waterproof and dustproof is graded at IP55 class.
*Customizable IP67 protection
Excellent heat dissipation performance
Hardware: large-area heat-dissipating copper sheets and heat-conducting copper strips,
aluminum alloy case, efficient heat dissipation.
software: FOC is vector control, the drive efficiency increases by 10%, and reduces heat by up to 10°C.
Structurally: double-sided heat dissipation, scale-shaped heat dissipation fins for efficient heat dissipation.
Shielded cable, CAN digital throttle + PWM throttle, can be customized to fully isolate the throttle
signal, and the quality of the throttle signal will be ensured in a variety of ways.
Information and Communication
Fast data transmission and real-time acquisition of key information such as ESC status, speed, throttle,
current, voltage, MOSFET temperature, and capacitor temperature can be achieved using the black box
function. Data analysis is clear at a glance with the use of DATALINK box.
FOC intelligent drive is accurate and efficient
FOC——Comparing ESC with the same power, Intelligent drive vector control has higher efficiency,
lower temperature, faster response, lower noise, lower interference, linear throttle,
precise control, and kinetic energy recovery.
The latest software from Hobbywing can be updated with the use of DATALINK box equipment.
*Support flight control remote upgrade (optional)
|Continuous current:||40A (Good heat dissipation)|
|Peak Current (3s):||150A (3S)|
|Magnetic encoder:||One motor, one program|
|Waterproof Rating:||IP55 (Custom IP67)|
|Weight:||234g (Without wires)|
|Throttle signal isolated:||Isolated|
|PWM Input Signal Level:||5V/3.3V|
|Throttle Signal Frequency:||50-500Hz|
|Operating Pulse Width:||1100-1940μS|
|Throttle travel calibration:||No|
|Double throttle signal:||Yes|
Manuals & Documents