Easy to use,
wide applications
Integrated power set, "ready to fly";
It fills the power gap of 100kg multi-rotor UAV
(four-rotor eight-propeller data),
and takes into account the use of vertical
take-off and landing UAV.
It is suitable for heavy-duty and long-endurance
operations such as logistics and fire protection.
Fault storage function
The ESC is equipped with a fault storage function.
When the power fails,
the code is automatically stored to effectively
analyze subsequent faults.
Dual throttle redundancy
PWM and CAN dual-way throttle
design are mutually backup.
Switchable between them in just milliseconds
to improve reliability during flight.
Precise control, safe, and reliable
The self-developed sine wave (FOC) ESC and 48-inch carbon fiber propellers
allows precision flight control and increased in fligh efficiency.
It captures key information such as voltage, current, temperature, and ESC status in real time.
FOC ESC
 
48-inch carbon fiber propellers
 
Lifetime maintenance reminder
Custom maintenance intervals, regular reminders,
thoughtful and meticulous when busy.
The appearance of the new
motor is more recognizable
as it adopts the CD pattern
design.
New appearance,
enhanced
performance
The rotor adopts a dual
centrifugal fan design to
efficiently dissipate heat,
at the same time, prevent dust.
Built with the best materials,
and well developed technology.

Enameled wire
High-quality enameled wirewith a temperature
resistance of over 200°C;

Bearings
Imported waterproof ball bearings,
the motor can be washed directly
with water.

NdFeB magnets
UH-grade high-temperature-resistant
NdFeB magnets;

Iron core
The newly designed lightweight iron core adopts a
special anti-rust treatment process, and the anti-rust
ability can pass the 48-hour salt spray test;

H11M CAD
Product Name
H11M
Specifications
Max Thrust 57.5kg
Recommended Battery 14S
Recommended Takeoff Weight 25-28kg/Rotor
Total Weight（without propellers） 4357g
Powertrain Arm Tube Outer Diameter φ50mm
Operating Temperature -20℃~50℃
Ingress Protection IP45
Motor
Stator Size φ111*22mm
KV Rating 70rpm/V
Motor Size Φ120.1*55.2mm
ESC
ESC 150A-FOC
PWM Input Signal Level 3.3V/5V
Throttle Pulse Width 1100-1940μs
Signal frequency 50-500HZ
Max. Input Voltage 65V
Continuous Current( Non-hermetic Ambient Temperature ≤60℃） 60A
Maximum Current( Non-hermetic Ambient Temperature ≤60℃） 150A
Communication Port CAN
Firmware Upgrade Support
Digital Throttle CAN
Propeller
Diameter X Thread Pitch 48*17.5"
Total weight( inc. adapter) 415g
Single propeller weight 117g
H11M Load performance parameters
H11M Techenical Parameters

Voltage(V)

Propeller(Inch)

Throttle(%)

Thrust(g)

Current(A)

Power(W)

RPM

Efficiency(g/W)

54V (14S LiPo)

48*17.5"

32%

7464

12.2

659.1

68

11.3

34%

8465

13.8

747.2

70

11.3

36%

9379

14.2

769.1

75

12.2

38%

10406

15.1

813.8

79

12.8

40%

11633

17.0

920.7

81

12.6

42%

13072

20.3

1097.7

80

11.9

44%

14692

24.7

1334.8

80

11.0

46%

16448

29.9

1614.2

80

10.2

48%

18295

35.5

1918.2

80

9.5

50%

20200

41.3

2234.0

82

9.0

52%

22146

47.3

2556.1

84

8.7

54%

24139

53.4

2887.0

85

8.4

56%

26198

59.9

3236.8

87

8.1

58%

28354

67.0

3621.0

88

7.8

60%

30642

75.1

4057.4

88

7.6

63%

34388

89.6

4845.9

87

7.1

66%

38536

107.8

5824.7

86

6.6

69%

43007

129.2

6983.7

84

6.2

72%

47563

152.7

8251.9

83

5.8

75%

51814

175.7

9496.8

82

5.5

78%

55276

195.1

10543.1

82

5.2

100%

57481

207.0

11183.7

82

5.1
The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >
Manuals
Schematic diagram of H11M carbon pipe
H11M Assembly Diagram
H11M 3D Model Drawing

Software Download

FAQ

Products Center

Service and Support

News Center

About

Global Partners

Welcome to Brushless
System Trends

Privacy Policy 粤ICP备14009225号-1  |  ©2015 Hobbywing Technology CO., LTD.. All rights reserved
H11M
Overview Specifications Support Accessories Detail
Easy to use,
wide applications
Integrated power set, "ready to fly";
It fills the power gap of 100kg multi-rotor UAV
(four-rotor eight-propeller data),
and takes into account the use of vertical
take-off and landing UAV.
It is suitable for heavy-duty and long-endurance
operations such as logistics and fire protection.
Fault storage function
The ESC is equipped with a fault storage function.
When the power fails,
the code is automatically stored to effectively
analyze subsequent faults.
Dual throttle
redundancy
PWM and CAN dual-way throttle
design are mutually backup.
Switchable between them
in just milliseconds
to improve reliability during flight.
Precise control,
safe and reliable
The self-developed sine wave (FOC) ESC and
48-inch carbon fiber propellers
allows precision flight control and
increased in fligh efficiency.
It captures key information such as voltage,
current, temperature,
and ESC status in real time.
Lifetime maintenance
reminder
Custom maintenance intervals,
regular reminders,
thoughtful and meticulous when busy.
Built with the best materials,
and well developed technology.
Enameled wire
High-quality enameled wirewith a temperature
resistance of over 200°C;
Bearings
Imported waterproof ball bearings, the motor
can be washed directly with water.
NdFeB magnets
UH-grade high-temperature-resistant NdFeB
magnets;
Iron core
The newly designed lightweight iron core
adopts a special anti-rust treatment process,
and the anti-rust ability can pass the 48-hour
salt spray test;

H11M CAD
Product Name
H11M
Specifications
Max Thrust 57.5kg
Recommended Battery 14S
Recommended Takeoff Weight 25-28kg/Rotor
Total Weight（without propellers） 4357g
Powertrain Arm Tube Outer Diameter φ50mm
Operating Temperature -20℃~50℃
Ingress Protection IP45
Motor
Stator Size φ111*22mm
KV Rating 70rpm/V
Motor Size Φ120.1*55.2mm
ESC
ESC 150A-FOC
PWM Input Signal Level 3.3V/5V
Throttle Pulse Width 1100-1940μs
Signal frequency 50-500HZ
Max. Input Voltage 65V
Continuous Current( Non-hermetic Ambient Temperature ≤60℃） 60A
Maximum Current( Non-hermetic Ambient Temperature ≤60℃） 150A
Communication Port CAN
Firmware Upgrade Support
Digital Throttle CAN
Propeller
Diameter X Thread Pitch 48*17.5"
Total weight( inc. adapter) 415g
Single propeller weight 117g
H11M Load performance parameters
H11M Techenical Parameters

Voltage(V)

Propeller(Inch)

Throttle(%)

Thrust(g)

Current(A)

Power(W)

RPM

Efficiency(g/W)

54V (14S LiPo)

48*17.5"

32%

7464

12.2

659.1

68

11.3

34%

8465

13.8

747.2

70

11.3

36%

9379

14.2

769.1

75

12.2

38%

10406

15.1

813.8

79

12.8

40%

11633

17.0

920.7

81

12.6

42%

13072

20.3

1097.7

80

11.9

44%

14692

24.7

1334.8

80

11.0

46%

16448

29.9

1614.2

80

10.2

48%

18295

35.5

1918.2

80

9.5

50%

20200

41.3

2234.0

82

9.0

52%

22146

47.3

2556.1

84

8.7

54%

24139

53.4

2887.0

85

8.4

56%

26198

59.9

3236.8

87

8.1

58%

28354

67.0

3621.0

88

7.8

60%

30642

75.1

4057.4

88

7.6

63%

34388

89.6

4845.9

87

7.1

66%

38536

107.8

5824.7

86

6.6

69%

43007

129.2

6983.7

84

6.2

72%

47563

152.7

8251.9

83

5.8

75%

51814

175.7

9496.8

82

5.5

78%

55276

195.1

10543.1

82

5.2

100%

57481

207.0

11183.7

82

5.1
The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >
Manuals
Schematic diagram of H11M carbon pipe
H11M Assembly Diagram
H11M 3D Model Drawing

Software Download

FAQ