Professional LCD Program Box

 The production of this product has been stopped and replaced by the Multifunction LCD Program Box 

 
 
The "Professional LCD Program Box" is applicable for programming the following ESC:
XERUN and EZRUN series Car ESC (Version 2.0 and 2.1)
XERUN-120A V3 ESC
PLATINUM series helicopter/aircraft ESC
PLATINUM V3 series helicopter/aircraft ESC
(Note: To work with XERUN V3 ESC, the LCD Program Box MUST be updated by a new version USB Link Software. Usually V3.2_121204 or later version is recommended)  
 
1  Working Modes
1.1  Working as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen. 
1.2  Working as an USB adapter to link the ESC with a PC, user can update the firmware of the ESC or precisely set the ESC by HOBBYWING USB LINK SOFTWARE on PC.
 
2  Specifications
2.1 Size:  91mm (L) * 54mm (W) * 18mm (H)
2.2 Weight:  65g 
2.3 Input Voltage:  4.8-6V
       (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box) 
2.4 Displayer: 16*2 characters LCD.
2.5 Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)

Products Center

Service and Support

News Center

About

Global Partners

Welcome to Brushless
System Trends

Privacy Policy 粤ICP备14009225号-1  |  ©2015 Hobbywing Technology CO., LTD.. All rights reserved
Professional LCD Program Box
Overview

 The production of this product has been stopped and replaced by the Multifunction LCD Program Box 

 
 
The "Professional LCD Program Box" is applicable for programming the following ESC:
XERUN and EZRUN series Car ESC (Version 2.0 and 2.1)
XERUN-120A V3 ESC
PLATINUM series helicopter/aircraft ESC
PLATINUM V3 series helicopter/aircraft ESC
(Note: To work with XERUN V3 ESC, the LCD Program Box MUST be updated by a new version USB Link Software. Usually V3.2_121204 or later version is recommended)  
 
1  Working Modes
1.1  Working as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen. 
1.2  Working as an USB adapter to link the ESC with a PC, user can update the firmware of the ESC or precisely set the ESC by HOBBYWING USB LINK SOFTWARE on PC.
 
2  Specifications
2.1 Size:  91mm (L) * 54mm (W) * 18mm (H)
2.2 Weight:  65g 
2.3 Input Voltage:  4.8-6V
       (If the ESC hasn’t a built-in BEC, you must use an additional battery pack to supply the program box) 
2.4 Displayer: 16*2 characters LCD.
2.5 Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)