Competition Design

The light weight of the Pro 160A is designed to meet the users requirement
of a light weight product for all marine competition which weight is a factor
of speed and endurance. The core program for top-level competition
products guarantees the user first-class control and “abundant”
programmable parameter items for different competition environments.

Competition
Design

High Voltage Built-in BEC

The built-in switch mode BEC with a maximum output of 8Amp and switchable
voltage of 6V/7.4v make this ESC compatible with high voltage servo.

High Voltage
Built-in BEC

Innovative Turbo Function

The world’s first marine ESC to have implemented the turbo timing function which will
give the user the edge over the competition with instant turbo boost.

Innovative
Turbo Function

Waterproof Design

100% waterproof without the need of extra protection.

Waterproof
Design

Reliability and performance

Built with the highest quality components (eg. MOSFET’s with extremely low internal resistance)
and coupled with cutting-edge firmware, the Pro 160A is featured by enhanced current rating
and reliability. Multiple safety adjustable options are in use, with the implementation of the
low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Reliability and
performance

Efficient Cooling system

TThe Hobbywing patented heat-conductive copper bar cover on the power board of
the ESC combined with the water cooling module efficiently and effectively
transfers heat to the outside thus keeping your ESC as cool as possible.

Efficient
Cooling system

Firmware Upgradeable

TThe Hobbywing patented heat-conductive copper bar cover on the power board of
the ESC combined with the water cooling module efficiently and effectively
transfers heat to the outside thus keeping your ESC as cool as possible.

Firmware
Upgradeable

Installation & Connection

1. Water Cooling Tube Connecting（Silicon tube needs to be provided by users.）
The aluminum water cooling tube (outer diameter = 5.5mm) has been pre-mounted on the ESC heatsink at factory. Please connect the silicon tube to the aluminum water cooling tube.
2. Motor Wiring

There is no polarity on the A/B/C wires between ESC and motor, so do not worry about how you connect them initially. You may find it necessary to swap two wires if the motor runs in reverse.
3. Receiver Wiring
1) How to connect the throttle control cable
Plug the throttle control cable (also called Rx cable) on the ESC into the throttle (TH) channel on receiver. The RED wire in the throttle control cable will output the BEC voltage of 6V/7.4V to the receiver and servo, so please do not connect any additional battery to the receiver.
2) How to connect the Turbo Acceleration signal wire (/single YELLOW wire)
Plug the Turbo Acceleration signal wire of the ESC into any unoccupied channel (for example, CH3/CH4) on your receiver.
4. Battery Wiring
Proper polarity is essential here! Make absolutely sure positive (+) of ESC connects to positive (+) of battery, and negative (-) of ESC connects to negative (-) of battery when you plug in your battery! If reverse polarity is applied to your ESC from the battery, it will damage your ESC. This will NOT be covered under warranty!

Packaging

Product Name
Product Number
Type Brushed/Brushless

Waterproof
Specifications Cont./Peak Current

Input

BEC Output
Wires & Connectors Input Wires

Output Wires

Input Connectors

Output Connecotors
ESC Programing via Transmitter

LED Program Box

LCD Program Box

WiFi Module

OTA Programmer

Program Port
Firmware Firmware Upgrade
Size & Weight Size

I.D./O.D. of the Water Cooling Pipe

Weight
Applications
Product Name Seaking Pro 160A
Product Number 30302460
Type Brushed/Brushless

Waterproof		 BL

WP
Specifications Cont./Peak Current

Input

BEC Output		 160A/1050A

2-6S LiPo/6-18 Cells NiMH

Switch Mode:6V/7.4V,4A
Wires & Connectors Input Wires

Output Wires

Input Connectors

Output Connecotors

 Red-12AWG-200mm*1/Black-12AWG-200mm*1

Black-12AWG-150mm*3

No

No
ESC Programing via Transmitter

LED Program Box

LCD Program Box

WiFi Module

OTA Programmer

Program Port		 Supported

Not Supported

Supported

Supported

Supported

Separate Program Wire
Firmware Firmware Upgrade Supported
Size & Weight Size

I.D./O.D. of the Water Cooling Pipe

Weight		 108.5x51.5x14.4mm

Ф3.0/5.5 mm

127g
Applications Mono2 /Other Competition Boats (≤120cm)
Support

Manuals & Documents

Manuals

Software Download

FAQ

UBEC 10A-Car

UBEC 10A-Car

Part Number: 30603003
Model: UBEC 10A-Car

+
UBEC 5A

UBEC 5A

ProductNumber：30607000
Model：UBEC 5A

+
Signal Coupler

Signal Coupler

Part Number: 30850200
Size: 45.4x11.6x7.7mm（LxWxH）
Only for OPTO version

+
Rotor Replacement Tool

Rotor Replacement Tool

PN: 30607000

+

Products Center

Service and Support

News Center

About

Global Partners

Welcome to Brushless
System Trends

Privacy Policy 粤ICP备14009225号-1  |  ©2015 Hobbywing Technology CO., LTD.. All rights reserved
Seaking Pro 160A
Overview Specifications Support Accessories Detail

Competition Design

The light weight of the Pro 160A is designed to meet the users requirement of a light weight product for all marine competition which weight is a factor of speed and endurance. The core program for top-level competition products guarantees the user first-class control and “abundant” programmable parameter items for different competition environments.

Competition
Design

High Voltage Built-in BEC

The built-in switch mode BEC with a maximum output of 8Amp and switchable voltage of 6V/7.4v make this ESC compatible with high voltage servo.

High Voltage
Built-in BEC

Innovative Turbo Function

The world’s first marine ESC to have implemented the turbo timing function which will give the user the edge over the competition with instant turbo boost.

Innovative
Turbo Function

Waterproof Design

100% waterproof without the need of extra protection.

Waterproof
Design

Reliability and performance

Built with the highest quality components (eg. MOSFET’s with extremely low internal resistance) and coupled with cutting-edge firmware, the Pro 160A is featured by enhanced current rating and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

Reliability and
performance

Efficient Cooling system

The Hobbywing patented heat-conductive copper bar cover on the power board of the ESC combined with the water cooling module efficiently and effectively transfers heat to the outside thus keeping your ESC as cool as possible.

Efficient
Cooling system

Firmware Upgradeable

The Hobbywing patented heat-conductive copper bar cover on the power board of the ESC combined with the water cooling module efficiently and effectively transfers heat to the outside thus keeping your ESC as cool as possible. 令产品永久享用最新功能。

Firmware
Upgradeable

Installation & Connection

1. Water Cooling Tube Connecting（Silicon tube needs to be provided by users.）
The aluminum water cooling tube (outer diameter = 5.5mm) has been pre-mounted on the ESC heatsink at factory. Please connect the silicon tube to the aluminum water cooling tube.
2. Motor Wiring

There is no polarity on the A/B/C wires between ESC and motor, so do not worry about how you connect them initially. You may find it necessary to swap two wires if the motor runs in reverse.
3. Receiver Wiring
1) How to connect the throttle control cable
Plug the throttle control cable (also called Rx cable) on the ESC into the throttle (TH) channel on receiver. The RED wire in the throttle control cable will output the BEC voltage of 6V/7.4V to the receiver and servo, so please do not connect any additional battery to the receiver.
2) How to connect the Turbo Acceleration signal wire (/single YELLOW wire)
Plug the Turbo Acceleration signal wire of the ESC into any unoccupied channel (for example, CH3/CH4) on your receiver.
4. Battery Wiring
Proper polarity is essential here! Make absolutely sure positive (+) of ESC connects to positive (+) of battery, and negative (-) of ESC connects to negative (-) of battery when you plug in your battery! If reverse polarity is applied to your ESC from the battery, it will damage your ESC. This will NOT be covered under warranty!

Packaging

Product Name Seaking Pro 160A
Product Number 30302460
Type Brushed/Brushless

Waterproof		 BL

WP
Specifications Cont./Peak Current

Input

BEC Output		 160A/1050A

2-6S LiPo/6-18 Cells NiMH

Switch Mode:6V/7.4V,4A
Wires & Connectors Input Wires

Output Wires

Input Connectors

Output Connecotors

 Red-12AWG-200mm*1/Black-12AWG-200mm*1

Black-12AWG-150mm*3

No

No
ESC Programing via Transmitter

LED Program Box

LCD Program Box

WiFi Module

OTA Programmer

Program Port		 Supported

Not Supported

Supported

Supported

Supported

Separate Program Wire
Firmware Firmware Upgrade Supported
Size & Weight Size

I.D./O.D. of the Water Cooling Pipe

Weight		 108.5x51.5x14.4mm

Ф3.0/5.5 mm

127g
Applications Mono2 /Other Competition Boats (≤120cm)
Product Name Seaking Pro 160A
Product Number 30302460
Type Brushed/Brushless

Waterproof		 BL

WP
Specifications Cont./Peak Current

Input

BEC Output		 160A/1050A

2-6S LiPo/6-18 Cells NiMH

Switch Mode:6V/7.4V,4A
Wires & Connectors Input Wires

Output Wires

Input Connectors

Output Connecotors

 Red-12AWG-200mm*1/Black-12AWG-200mm*1

Black-12AWG-150mm*3

No

No
ESC Programing via Transmitter

LED Program Box

LCD Program Box

WiFi Module

OTA Programmer

Program Port		 Supported

Not Supported

Supported

Supported

Supported

Separate Program Wire
Firmware Firmware Upgrade Supported
Size & Weight Size

I.D./O.D. of the Water Cooling Pipe

Weight		 108.5x51.5x14.4mm

Ф3.0/5.5 mm

127g
Applications Mono2 /Other Competition Boats (≤120cm)
Support

Manuals & Documents

Manuals

Software Download

FAQ

UBEC 10A-Car
UBEC 10A-Car

Part Number: 30603003
Model: UBEC 10A-Car
UBEC 5A
UBEC 5A

ProductNumber：30607000
Model：UBEC 5A
Signal Coupler
Signal Coupler

Part Number: 30850200
Size: 45.4x11.6x7.7mm（LxWxH）
Only for OPTO version
Rotor Replacement Tool
Rotor Replacement Tool

PN: 30607000