IP67 protection,
all-weather operation
The new XR10 Pro-WP is able to easily handle conditions,
from rain, dust, and sand with a proven waterproof and
dust-proof design that is exceeds IP67 industrial standards.
  Note  
Do not submerge. Damage may occur when submerged.
Built-in reverse polarity
protection circuit
The ESC has built in reverse voltage protection.
This ensures the ESC will be protected from
accidental cross connection of the battery.
  Note  
The reverse polarity protection of the entire power system can be
achieved only by using the non-polarity capacitor sold as an option.
The standard capacitor of the ESC does not have this protection.
Reverse connection of the battery will damage the capacitor, but the ESC
should not be damaged. Replacement of the capacitor is needed immediately.
Smart Fan start &
stop function
The fan does not run when the ESC temperature is low.
The fan automatically turns on when the ESC
temperature reaches the preset value.
The smart fan start&stop function not only reduces noise,
saves power, but also ensures that the ESC works
in the optimal temperature range.
Equipped with powerful
core processor
The 32-bit M4 processor
greatly improves the data processing capabilities of the ESC.
It not only allows the ESC to respond faster
but is able to perform
complexity and precise data calculations
It lays the foundation for subsequent ESC function upgrades
and optimization. Professional competition-grade hardware
combined with powerful software makes it a weapon
global competition.
Adjustable throttle curvature
New throttle curvature adjustments
allow additional tuning of the throttle response.
With +10 curve, to -10 curve settings, and custom Curve
allow drivers more options to get the perfect throttle feel.
Real-time data acquisition
easy analysis
When connected to the OTA module,
and using the HW Link V2 App,
bench top live data can be monitored. You are able to view,
Throttle, Voltage, Temperatures, and RPM in real time.
The ESC also supports additional data logs
when operated with the OTA installed.
Data logs are saved to the OTA to be viewed after the run.
  Note   The effective Bluetooth transmission distance is approximately 5m!
Use the OTA Module
and your Phone/Tablet
to Tune the ESC.
The OTA module allows you to connect to
your ESC using the HW Link V2 app.
This allows ESC tuning and Firmware updates.
Built-in BEC supporting
high-voltage servos
The ESC has a built in switch mode BEC
rated up to 10 amps.
BEC voltage is adjustable from
5-7.4 volts. (0.1v steps)
The internal BEC is able to easily handle
todays most power hungry servos.
Max Brake Tuning - 101%-150%
Active brake provides stronger brake force
and ensures Stock/Spec class racing setups
have enough stopping power.
Developed for the ESC brakes to handle very tall spec
racing gear ratios that are commonly used.
Wide range of applications
Based on the flagship XR10 Pro series platform,
it has strong output capability and is suitable for
various Modify and Stock competitions in
1/10 on-road and 1/10 off-road.
Product Name
XeRun XR10 PRO WP
Product Number
  30112618
Type
Scale 1/10th
Brushed/Brushless BL
Sensored/Sensorless SD
Waterproof Waterproof
Specifications
Cont./Peak Current 160A/1200A
Input Voltage 2S Lipo
BEC BEC Output Switch Mode 5V-7.4V @5A
Wires & Connectors
Input Wires Black-13AWG-200mm*2
Output Wires Black-13AWG-200mm*3
Input Connectors No
Output Connectors No
Fan
Size 25*25*10mm
Voltage Range 5-7.4V
Powered by BEC
ESC Programing via
SET Button on ESC Not Supported
LED Program Box Not Supported
LCD G2 Program Box Supported
LCD PRO Supported
OTA Programmer Supported
Program Port Separate Program Port
Data Recording
Extreme value Supported
Real-time Data Supported
Historical data (Graph) Supported
Firmware
Firmware Upgrade Supported
Size & Weight
Size 37.7*37.2*19.6mm
Weight 95.6g(w/Wires)
Applications
Motors Sensored brushless motors / Sensorless brushless motors
Vehicles 1/10th Touring car & Buggy racing, 1/10th Drift,F1,Rally
KV Rating/T Count Touring Car: ≥4.5T Buggy: ≥5.5T
Support

Manuals & Documents

Manuals

Software Download

FAQ

OTA Programmer

OTA Programmer

Product Number: 30850400
Working Voltage: 5-12.6V
Supported Bluetooh Version: ≥ 4.0
Effective Range: 0-5m (Open Field)
Applications: work on the XzRun series,
EzRun series of car ESCs, and the Platinum
series of aircraft ESCs, and
Seaking Prp series of boat ESCs.

+
LCD Program Box Pro

NEW

LCD Program Box Pro

Product Number: 30502002
Input Voltage: DC 5V~12.6V
Application: brushless ESC
Weight: 85g
Display:LCD

+

Products Center

Service and Support

News Center

About

Global Partners

Welcome to Brushless
System Trends

Privacy Policy 粤ICP备14009225号-1  |  ©2015 Hobbywing Technology CO., LTD.. All rights reserved
XeRun XR10 Pro WP
Overview Specifications Support Accessories Detail
IP67 protection,
all-weather operation
The new XR10 Pro-WP is able to easily handle conditions, from rain, dust, and sand with a proven waterproof and dust-proof design that is exceeds IP67 industrial standards.
  Note  
Do not submerge. Damage may occur when submerged.
Built-in reverse polarity
protection circuit
The ESC has built in reverse voltage protection.
This ensures the ESC will be protected from
accidental cross connection of the battery.
  Note  
The reverse polarity protection of the entire power system can be achieved only by using the non-polarity capacitor sold as an option. The standard capacitor of the ESC does not have this protection. Reverse connection of the battery will damage the capacitor, but the ESC should not be damaged. Replacement of the capacitor is needed immediately.
Smart Fan start &
stop function
The fan does not run when the ESC temperature is low. The fan automatically turns on when the ESC temperature reaches the preset value. The smart fan start&stop function not only reduces noise, saves power, but also ensures that the ESC works in the optimal temperature range.
Equipped with powerful
core processor
The 32-bit M4 processor
greatly improves the data processing capabilities of the ESC. It not only allows the ESC to respond faster
but is able to perform complexity and precise data calculations
It lays the foundation for subsequent ESC function upgrades and optimization. Professional competition-grade hardware combined with powerful software makes it a weapon global competition.
Adjustable throttle curvature
New throttle curvature adjustments
allow additional tuning of the throttle response.
With +10 curve, to -10 curve settings, and custom Curve allow drivers more options to get the perfect throttle feel.
Real-time data acquisition
easy analysis
When connected to the OTA module,
and using the HW Link V2 App,
bench top live data can be monitored. You are able to view, Throttle, Voltage, Temperatures, and RPM in real time. The ESC also supports additional data logs when operated with the OTA installed. Data logs are saved to the OTA to be viewed after the run.
  Note   The effective Bluetooth transmission distance is approximately 5m!
Use the OTA Module
and your Phone/Tablet
to Tune the ESC.
The OTA module allows you to connect to
your ESC using the HW Link V2 app.
This allows ESC tuning and Firmware updates.
Built-in BEC supporting
high-voltage servos
The ESC has a built in switch mode BEC
rated up to 10 amps.
BEC voltage is adjustable from
5-7.4 volts. (0.1v steps)
The internal BEC is able to easily handle
todays most power hungry servos.
Max Brake Tuning - 101%-150%
Active brake provides stronger brake force and ensures Stock/Spec class racing setups have enough stopping power. Developed for the ESC brakes to handle very tall spec racing gear ratios that are commonly used.
Wide range of applications
Based on the flagship XR10 Pro series platform,
it has strong output capability and is suitable for
various Modify and Stock competitions in
1/10 on-road and 1/10 off-road.
Product Name
XeRun XR10 PRO WP
Product Number
  30112618
Type
Scale 1/10th
Brushed/Brushless BL
Sensored/Sensorless SD
Waterproof Waterproof
Specifications
Cont./Peak Current 160A/1200A
Input Voltage 2S Lipo
BEC BEC Output Switch Mode 5V-7.4V @5A
Wires & Connectors
Input Wires Black-13AWG-200mm*2
Output Wires Black-13AWG-200mm*3
Input Connectors No
Output Connectors No
Fan
Size 25*25*10mm
Voltage Range 5-7.4V
Powered by BEC
ESC Programing via
SET Button on ESC Not Supported
LED Program Box Not Supported
LCD G2 Program Box Supported
LCD PRO Supported
OTA Programmer Supported
Program Port Separate Program Port
Data Recording
Extreme value Supported
Real-time Data Supported
Historical data (Graph) Supported
Firmware
Firmware Upgrade Supported
Size & Weight
Size 37.7*37.2*19.6mm
Weight 95.6g(w/Wires)
Applications
Motors Sensored brushless motors / Sensorless brushless motors
Vehicles 1/10th Touring car & Buggy racing, 1/10th Drift,F1,Rally
KV Rating/T Count Touring Car: ≥4.5T Buggy: ≥5.5T
Support

Manuals & Documents

Manuals

Software Download

FAQ

OTA Programmer
OTA Programmer

Product Number: 30850400
Working Voltage: 5-12.6V
Supported Bluetooh Version: ≥ 4.0
Effective Range: 0-5m (Open Field)
Applications: work on the XzRun series,
EzRun series of car ESCs, and the Platinum
series of aircraft ESCs, and
Seaking Prp series of boat ESCs.
LCD Program Box Pro
LCD Program Box Pro

Product Number: 30502002
Input Voltage: DC 5V~12.6V
Application: brushless ESC
Weight: 85g
Display:LCD