27
Recommended
4-axis
KG
20L aircraft
Power and efficiency double breakthrough
The new X9plus power system has greatly improved in strength and efficiency. It uses a load of up to 13kg/axis,
with a maximum pulling force of 26.5kg for 36-inch composite aviation folding blades.
It is recommended to use 11-13kg single-axis load for better efficiency in the
range of 11-12kg. The motor adopts the 9 series large load motor from Hobbywing.
The electromagnetic design and system optimization of the single-axis load(13kg)
at fixed point strengthens the algorithm of the FOC application.
Tube-on-one
structural design
The X9-Plus is three-dimensional and
designed with an integrated motor
and ESC as one.
The installation of the lightweight structure
is convenient and can be matched
40mm
Circular diameter carbon fiber tube
Protection class IPX6
The X9-Plus is equipped with an overall waterproofing protection
of IPX6 rating. It guarantees excellent waterproofing and dustproofing
protection. The X9-Plus is anti-corrosive and is fully sealed to cope
with harsh environment and climates around the world.
Rapid cooling, collision-proof
structure design
The motor torque efficiency improves tremendously under high-power
load usage.The rotor widens the air duct from the fan and reduces the
current and heat underthe same tensile composite; The anti-impact design
of the tail end of the motorseat absorbs the impact to protect the motor and
ESC and reduces the damage caused by a crash or faulty components.
Navigation lights
More power failures are added into the system in order to find the fault.
The flashing display of the flight lights will indicate the issue and users
are able to troubleshoot them in QuickTime.
Multiple protection functions
The X9-Plus power system is equipped with several protection functions such as:
Power-on self-test, Power-on voltage abnormal protection, Current protection
and Stall protection.It is able to output an operating status data to theflight controller in
real time including; input throttle amount, responsethrottle volume motor speed, bus voltage,
bus current, phase current,capacitor temperature and MOSFET temperature, etc.
This allows the flightcontroller to grasp the electronics in real-time during operation to
improve the flight performance and efficiency. It improves the overall
system reliability.

Note: Using the Hobbywing DataLink data acquisitionmemory (Note: need to be
purchased separately) cansimultaneously collect the real-time operation data
of the 8-channel power system, and pass it to theflight controller through the bus interface to
form a closed-loop control system.
Support system upgrades
Hobbywing allows you to update your ESC to the latest
firmware and synchronize it using a
computer via the Hobbywing Data Link software at all times.
XRotor X9 PLUS CAD
Product Name
XRotor X9 PLUS
Specifications
Max Thrust 27kg/rotor(54V, Sea Level)
Recommended Takeoff Weight 11-13kg/rotor(54V, Sea Level)
Recommended Battery 14S(LiPo)
Operating Temperature -20~50℃
Total Weight 1774g
Ingress Protection IPX6
Motor
KV Rating 100rpm/V
Stator Size 96X20mm
Bearing Bearings imported from Japan
ESC
Recommended LiPo Battery 6-14S LiPo
PWM Input Signal Level 3.3V/5V(Compatible)
Throttle Signal Frequency 50-500Hz
Operating Pulse Width 1050-1950us(Fixed or cannot be Programmed)
Max. Input Voltage 61V
Max. Input Current (Short duration) 120A(With/ Good Heat Dissipation)
BEC No
Propeller
Diameter×Pitch 36190
XRotor X9 PLUS Techenical Parameters

Voltage(V)

Propeller(Inch)

Throttle(%)

Thrust(g)

Current(A)

Power(W)

Speed(RPM)

Efficiency(g/W)

54V(14S LiPo)

HW 36*19Inch Foldable Propeller

40%

5460

9.5

509.3

1897

10.7

42%

5915

10.7

573.2

1973

10.3

44%

6405

12.0

646.3

2053

9.9

46%

7045

13.9

747.6

2152

9.4

48%

7780

16.2

870.9

2261

8.9

50%

8405

18.3

980.8

2350

8.6

52%

9180

20.9

1122.9

2454

8.2

54%

9820

23.2

1244.5

2537

7.9

56%

10045

24.0

1288.2

2565

7.8

58%

11000

27.5

1478.5

2680

7.4

60%

11165

28.2

1512.1

2699

7.4

62%

12395

33.0

1771.2

2836

7.0

64%

13060

35.7

1917.5

2906

6.8

66%

13825

39.0

2091.9

2983

6.6

68%

14790

43.3

2322.3

3076

6.4

70%

16150

49.8

2670.5

3198

6.0

72%

17080

54.6

2927.3

3276

5.8

74%

17855

58.8

3154.6

3338

5.7

76%

18880

64.8

3476.3

3418

5.4

78%

19800

70.6

3787.6

3487

5.2

80%

21340

81.4

4362.8

3600

4.9

100%

22535

90.6

4860.2

3688

4.6

The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.
XRotor X9 PLUS Techenical Parameters

Voltage(V)

Propeller(Inch)

Throttle(%)

Thrust(g)

Current(A)

Power(W)

Speed(RPM)

Efficiency(g/W)

46V(12S LiPo)

HW 36*19Inch Foldable Propeller

40%

7365

16.0

738.9

2185

10.0

44%

8555

20.6

949.8

2362

9.0

46%

9145

23.0

1062.2

2445

8.6

48%

9770

25.7

1184.3

2530

8.2

50%

10590

29.2

1347.3

2635

7.9

52%

11155

31.7

1460.4

2704

7.6

54%

11550

33.4

1539.7

2750

7.5

56%

12510

37.6

1733.4

2856

7.2

58%

13625

42.5

1961.5

2970

6.9

60%

14495

46.5

2144.5

3052

6.8

62%

14895

48.4

2230.8

3088

6.7

64%

15675

52.2

2404.9

3156

6.5

66%

17055

59.4

2737.8

3272

6.2

68%

18295

66.7

3072.7

3371

6.0

70%

19530

74.8

3447.8

3469

5.7

72%

20285

80.3

3699.5

3529

5.5

74%

21240

87.7

4042.4

3604

5.3

76%

22850

101.6

4677.6

3726

4.9

78%

23540

107.8

4966.3

3775

4.7

80%

24470

116.5

5363.8

3834

4.6

100%

25080

122.2

5624.9

3868

4.5

The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >

Software Download

FAQ

XRotor X9 Plus

13KG large load application

The new X9 power system has greatly improved in strength and efficiency. It uses a load of up to 13kg/axis, with a maximum pulling force of 26.5kg for 36-inch composite aviation folding blades. It is recommended to use 11-13kg single-axis load for better efficiency in the range of 11-12kg. The motor adopts the 9 series large load motor from Hobbywing. The electromagnetic design and system optimization of the single-axis load(13kg) at fixed point strengthens the algorithm of the FOC application.

13KG large load application

Efficiency & Performance Dual Layer Optimization

The stator core structure from the motor has been redesigned to reduce the internal resistance and increase the overall efficiency rate. Additionally, the weight of the motor is reduced to improve the overall performance.By adopting the FOC(Field Oriented Control) vector control drive technology with fixed-point optimization, the drive efficiency and the battery life are further improved. The factory chooses high quality large bearing system (6001) to increase load capacity. This would mean that the structure of the diameter axis will be increased to give better rigidity, longer life and is not easily deformed.

Efficiency & Performance Dual
Layer Optimization

Tube-on-one structural design

XThe X9-Plus is three-dimensional and designed with an integrated motor and ESC as one. The installation of the lightweight structure is convenient and can be matched with the circular carbon fiber tube(40mm).

Tube-on-one
structural design

Protection class IPX6

The X9-Plus is equipped with an overall waterproofing protection of IPX6 rating. It guarantees excellent waterproofing and dustproofing protection. The X9-Plus is anti-corrosive and is fully sealed to cope with harsh environment and climates around the world.

Protection class IPX6

Rapid cooling, collision-proof structure design

The motor torque efficiency improves tremendously under high-power load usage. The rotor widens the air duct from the fan and reduces the current and heat under the same tensile composite; The anti-impact design of the tail end of the motor seat absorbs the impact to protect the motor and ESC and reduces the damage caused by a crash or faulty components.

Rapid cooling,
collision-proof structure design

Navigation lights

More power failures are added into the system in order to find the fault. The flashing display of the flight lights will indicate the issue and users are able to troubleshoot them in QuickTime.

Navigation lights

Multiple protection functions

The X9-Plus power system is equipped with several protection functions such as: Power-on self-test, Power-on voltage abnormal protection, Current protection and Stall protection.It is able to output an operating status data to the flight controller in real time including; input throttle amount, response throttle volume motor speed, bus voltage, bus current, phase current, capacitor temperature and MOSFET temperature, etc. This allows the flight controller to grasp the electronics in real-time during operation to improve the flight performance and efficiency. It improves the overall system reliability.
Note: Using the Hobbywing DataLink data acquisition memory (Note: need to be purchased separately) can simultaneously collect the real-time operation data of the 8-channel power system, and pass it to the flight controller through the bus interface to form a closed-loop control system.

Multiple
protection functions

Support system upgrades

Hobbywing allows you to update your ESC to the latest firmware and synchronize it using a
computer via the Hobbywing Data Link software at all times.

XRotor X9 PLUS CAD
Product Name
XRotor X9 PLUS
Specifications
Max Thrust 27kg/rotor(54V, Sea Level)
Recommended Takeoff Weight 11-13kg/rotor(54V, Sea Level)
Recommended Battery 14S(LiPo)
Operating Temperature -20~50℃
Total Weight 1774g
Ingress Protection IPX6
Motor
KV Rating 100rpm/V
Stator Size 96X20mm
Bearing Bearings imported from Japan
ESC
Recommended LiPo Battery 6-14S LiPo
PWM Input Signal Level 3.3V/5V(Compatible)
Throttle Signal Frequency 50-500Hz
Operating Pulse Width 1050-1950us(Fixed or cannot be Programmed)
Max. Input Voltage 61V
Max. Input Current (Short duration) 120A(With/ Good Heat Dissipation)
BEC No
Propeller
Diameter×Pitch 36190
XRotor X9 PLUS Techenical Parameters

Voltage(V)

Propeller(Inch)

Throttle(%)

Thrust(g)

Current(A)

Power(W)

Speed(RPM)

Efficiency(g/W)

54V(14S LiPo)

HW 36*19Inch Foldable Propeller

40%

5460

9.5

509.3

1897

10.7

42%

5915

10.7

573.2

1973

10.3

44%

6405

12.0

646.3

2053

9.9

46%

7045

13.9

747.6

2152

9.4

48%

7780

16.2

870.9

2261

8.9

50%

8405

18.3

980.8

2350

8.6

52%

9180

20.9

1122.9

2454

8.2

54%

9820

23.2

1244.5

2537

7.9

56%

10045

24.0

1288.2

2565

7.8

58%

11000

27.5

1478.5

2680

7.4

60%

11165

28.2

1512.1

2699

7.4

62%

12395

33.0

1771.2

2836

7.0

64%

13060

35.7

1917.5

2906

6.8

66%

13825

39.0

2091.9

2983

6.6

68%

14790

43.3

2322.3

3076

6.4

70%

16150

49.8

2670.5

3198

6.0

72%

17080

54.6

2927.3

3276

5.8

74%

17855

58.8

3154.6

3338

5.7

76%

18880

64.8

3476.3

3418

5.4

78%

19800

70.6

3787.6

3487

5.2

80%

21340

81.4

4362.8

3600

4.9

100%

22535

90.6

4860.2

3688

4.6

The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.
XRotor X9 PLUS Techenical Parameters

Voltage(V)

Propeller(Inch)

Throttle(%)

Thrust(g)

Current(A)

Power(W)

Speed(RPM)

Efficiency(g/W)

46V(12S LiPo)

HW 36*19Inch Foldable Propeller

40%

7365

16.0

738.9

2185

10.0

44%

8555

20.6

949.8

2362

9.0

46%

9145

23.0

1062.2

2445

8.6

48%

9770

25.7

1184.3

2530

8.2

50%

10590

29.2

1347.3

2635

7.9

52%

11155

31.7

1460.4

2704

7.6

54%

11550

33.4

1539.7

2750

7.5

56%

12510

37.6

1733.4

2856

7.2

58%

13625

42.5

1961.5

2970

6.9

60%

14495

46.5

2144.5

3052

6.8

62%

14895

48.4

2230.8

3088

6.7

64%

15675

52.2

2404.9

3156

6.5

66%

17055

59.4

2737.8

3272

6.2

68%

18295

66.7

3072.7

3371

6.0

70%

19530

74.8

3447.8

3469

5.7

72%

20285

80.3

3699.5

3529

5.5

74%

21240

87.7

4042.4

3604

5.3

76%

22850

101.6

4677.6

3726

4.9

78%

23540

107.8

4966.3

3775

4.7

80%

24470

116.5

5363.8

3834

4.6

100%

25080

122.2

5624.9

3868

4.5

The above data is measured by changing the throttle input to adjust the tension under the environment of 25°C and sea level.
Support

Manuals & Documents

Disclaimer

The purpose of this website is only to introduce you to the basic situation of HOBBYWING company and product information. Unless otherwise stated, all information provided on this website should not be regarded as an offer or acceptance, and this website will not assume any binding obligations to you as a result of the provision of information. For all your requests, HOBBYWING reserves the full right to decide whether to commit or not.

This Website and its contents are provided for your convenience on an "as is" basis and your use of this Website is at your sole risk. HOBBYWING does not guarantee that this website will be uninterrupted or error-free, and reserves the right to amend this website or withdraw access to this Website at any time. We make no warranties, express or implied, as to the content, existence, accuracy or reliability of this Website, including, but not limited to, warranties of title, non-infringement or implied warranties of merchantability or fitness for a particular purpose or use.

HOBBYWING shall not be liable for any direct, indirect, incidental, special or consequential damages, loss of profits or business interruption caused by the use or inability to use the services provided by the Website, even if HOBBYWING has been advised of the possibility of similar losses. The exclusions and limitations of the warranty liability of HOBBYWING shall be effective to the extent permitted by applicable law.

HOBBYWING shall not be liable for any damage or loss to your computer system or any other software, hardware, IT system or property caused by viruses or other destructive programs caused by accessing, viewing and using this website or downloading any content from this Website (including but not limited to 2D model files, 3D model files).

HOBBYWING shall not be liable for any direct or indirect damage or loss caused by any third party using illegal means to access the website to obtain the relevant passwords, information and content.

If you or your company is located in the United States or Canada, you need to fill out this disclaimer confirmation letter online and submit it successfully before you can download the relevant materials you are interested in. The link address you fill in online is https://www.hobbywingdirect.com/pages/digital-file-release-form

If you do not agree with this disclaimer, please do not continue to this page. If you continue to access, browse and use this interface, you have read, understood and agreed to be bound by this statement and comply with all applicable laws and regulations.

HOBBYWING reserves the right to correct, modify and update this statement at any time.

Confirm >

Software Download

FAQ